Lithe Audio PRO PoE Bolt-on

Zoom

RRP: $399.00

SKU: 06520

STEP 2: CHOOSE YOUR MODULES

–+

Description

Lithe Audio PRO PoE Bolt-On – Enabling the PRO series all-in-one ceiling speaker to be powered by PoE. Using the latest in PoE++ technology, making them perfect for any domestic or commercial audio situation.

For Lithe Audio Pro-Series only

PoE++ delivers 60W of power Via a CAT cable

When powered directly from network cabling infrastructure, the Pro Series uses the latest standard (IEEE 802.3bt) to deliver up to 60W of power to each speaker.

Low Power

Use low voltage CAT6 cables to deliver power to your speaker safely and efficiently

Patent Pending

PoE powered Ceiling Speakers

PoE++ 60W

Perfectly tuned for powering the Lithe Audio Pro Series ceiling speakers

the technical bit

Simple to install diagram via PoE, steamlining safe and managable audio networking

Specifications

PoE Standard: IEEE 802.3 af/at/bt powered device (PD)
Power Level: upto 71.3W
Max ethernet cable distance: 100m / 3287ft
PoE Injector to deliver miniumum of 60W power via IEEE 802.3af/at/bt standard

Equipment Required

PoE Injector with 60w+ output
CAT5 or CAT6 Cable
Type 3

Installation Guide

Specification Sheet

Common questions

Please see below most commonly asked questions, any further answers can be found within support

How easy are the speakers to setup?

Our Multiroom speakers need to be setup by pairing the device via our Lithe Audio App, which will walk you through step by step how to connect them to your network.

Do the speakers need to be connected to separate amplifier?

The speaker requires NO additional amplifiers, router, controllers, mainframes, all you need is within the box. Saving you space and money, Just download the app and connect power.

Can the Multiroom ceiling speakers be used in the bathroom?

Yes our bathroom rated version is IP44 rated for bathroom use. Do not place speaker directly above shower unit, bath, sinks or radiators.

Are the Multiroom speakers easy to wire to mains supply?

Yes, you can connect the power supply via the supplied plug into a main socket OR connect to lighting circuit either existing ceiling rose or junction box by wiring in a single plug socket or terminating the plug to a fused spur, with an 3A rated fuse. (Make sure that the live is not connected to the switched Live otherwise the speakers will only become active when switching on lights) All electrical wiring must be done by a qualified electrician or similarly qualified person. Instructions enclosed within the box advise how to fit the speaker, if unsure seek a qualified electrician to avoid damage to the product and for your safety.